Forest Section Complete?

My first 12" x 12" forest section is complete. Taking advantage of a momentarily empty house last night, I set to work with my newly acquired Elmers Spray glue and set to work. I am nearly happy with it. The tree trunks need to by drybrushed but I worry that there isn't enough texture to make it worth it. The tops of the trees did not come out how I wanted them to. I will have to figure something out to correct them. Maybe some clump foliage on top or something. In general, the piece is enough of a success to try again. I would like 2 more 12 x 12 sections. But this will go through two and a half bags of my trees. There are 12 total trees on the base. I may move on to 6" x 12" pieces instead and try three of those. Then some 6" x 6" ones and some 6" x 3" with some variations in shapes. The terrain for the War of Jenkin's Ear is rather tree heavy and I want the table to feel like it is largely wooded.

Swampland is another feature of the area. I have two types of swampy terrain. I have felt mats that are covered in spackle and painted with splashes of Woodland Scenics water product on them. They look OK but have the advantage of being able to put trees and other terrain on top of them. Which should help. The other pieces I have are 3d printed swamp sections with pools of water on them. Of these, I have 2 6" x 6" sections and several more smaller sections. I can spread these about with some sproadic trees about to give the feel of the swamp land that I am looking for. The mat probably better defines the area of the swamp but the other pieces look better. All of this can be used in other periods or places. For example, the Eastern Front of WWII. Plenty of woods and swamps there. Also there are TFL supplements for the AWI that can make use of these as well.

The piece that I keep putting off is the large River. I will try to work on that Saturday. I know what my honey-do list consists of and have the timing for when I need to run out and about. This allow me some time early in the morning to knock out some terrain before the family wakes up. We will see what actually happens.

WOJE Part 182

It feels like this project never ends. I have started flocking the tree tops for the tall pine section. So far, it looks pretty good. I am sort of following what Luke Towand (sp?) posted on his blog. I have 2 colors of flock to use. The problem is, I don't have a proper spray glue. I am concerned that what I have is going to fall off. I need to head to the Home Depot at lunch and take care of that little detail.

If possible, I will get pictures of where I am with this on Saturday. If the thing turns out OK, I will make at least one more of the large sections and then several smaller pieces. The thought is to have several 6" x 6", some 6" x 3" and a couple of 3" x 3" section of tall pines. I may not have enough trees to pull all of this off. I am using 1/4" plywood for the base as I have a sheet of it in the garage that is more than enough for my plans.

What I will do different next time is to spend more time sanding the edges of the base. I really was lazy with this effort and the result is poorer for it. I can throw some clump foliage next to it to help it blend in better on the table. The results thus far seem acceptable. For the base, I just need to dry brush the tree trunks for the first piece to be finished off.

I have primed a 15mm Piragua and a Scout boat. I plan on equipping the scout boat with a pair of swivell guns and will be rigging it. I don't have crew for these ships yet, but I am not convinced that they need it. I will probably change my mind at some point. The Piragua will be unarmed. I will likely rig it as well. Both will have 2 masts and fore and aft rigging. I will be testing out the rigging instructions that I included in the WOJE book. I'll update with pictures when done.

What is missing? At this point, I think I have enough terrain done or nearly done. I have a river to make. I will be using a plastic sheet that is painted on the underside for the river. it will be over a foot wide and over four feet long. This should be plenty of river for a Scout Boat to navigate. I am keen to get this scenario on the table as it has captured my imagination. I will start laying out the tables with more than the painters tape that I use for play tests. With any luck, I could be running a game or two soon.

Hopefully will have a better update over the weekend.

Forward Movement WOJE

I managed another swamp section and a canoe. The canoes that I have are from the Blue Moon pack Indians in Long Canoes. The term long is relatively misleading. They can hold up to 5 Indians that come with the pack. Four rowers and a musket armed indian per canoe. Two canoes in the pack. I am happy with the miniatures but really need larger canoes that hold more.

I have made great progress on the test forest section that I am working on. It is a section that is 12" x 12" in size. The base is ready for painting now. The tree trunks need a dry brushing as well. The tree tops are the question at the moment. I am unsure if they will work. What I can't find is my can of 3m Spray Adhesive. It is eluding me. I know it is here in the house, just not sure where.

This is where I am at the moment with the forest section. Plenty of painting to do. The tree tops need to be flocked. I have primed it since then. I need to make several more sections.

I will be working on a 15mm Scout Boats and a piragua. Also have the other canoe to paint. Might get this done this week. Who knows?

Quick Edit, finished painting the basing of the forest. What shows is I am terrible at Drybrushing. Completely terrible.